A furnace plays an important role for your home’s comfort even in winters and summers. It will only give you the best comfort like efficient heating, steady and safe. But if one of the main safety components is affected it will cause disturbance with the whole working system of the furnace and you may notice some warning signs.One of the reasons which leads to several problems is symptoms of a bad limit switch on the furnace.
A limit switch controls main functions of your furnace like preventing overheating and controls the blower fan. If issues exist in these components it affects the furnace efficiently working or the furnace will completely shut off. In this detailed guide your experts at MileHi HVAC will guide you related to what causes limit switch problems, what are warning signals and what you should do next.
Functions of furnace limit switch
Before understanding about symptoms of bad limit switch it is important to know how the switch functions and what are its responsibilities:
Safety Control: It automatically shuts off the furnace when the heating temperature becomes very high.
Fan Control: It indicates the blower when to turn on and off.
Common Symptoms of bad limit switch on furnace
The main concern of homeowners is being able to recognize what are the symptoms of bad limit switch on furnace before the problems become severe.Here are the common signals you will show:
Furnace keeps running constantly
If the blower never turns off then the heating system will not be controlled. This often indicates overheating and improper readings.
Short cycles
When you notice that your furnace turns on and off rapidly and is not properly functioning it leads to inaccurate temperature communication inside the system.
Overheating shutdowns
Your furnace faces several safety shutdowns due to the reason that a failing limit switch may incorrectly sense temperatures.
Burning Smells
A malfunctioning switch may affect the blower which causes the internal components to overheat and produce different odors.
Limit switch failure causes
The common causes of failure are as under:
- Clogged air filters that restricts the airflow
- Dirty components that holding excess heat
- Blower fan issues
- Wiring problems
- Longer lifespan
Resetting faulty limit switch
Many homeowners try to reset the limit switch when the furnace is not working properly but this is a temporary step which clears the error and it does not solve the problem.
- You should perform the resetting process once, not repeatedly.
- After reset if the furnace continues shutting off it means that the switch has completely failed.
- Overheating is a dangerous process so resetting is not a safe option.
- If you have tried the reset limit switch on the furnace and still experience shutdowns then call the technicians immediately.
You may read Why Does A Gas Furnace Stop Working?
How to test a furnace limit switch
Professional limit switch testing is the most safest and accurate way to diagnose the issue. During a service technician will:
- Checks the electrical continuity
- Inspect the temperature readings
- Evaluate airflow
- Measures the internal heating level
DIY limit switch testing is only the safest option if you have the experience because working inside a furnace carries electrical and fire risks.
Importance of proper fan limit switch settings
Another reason behind switch failure is improper setting of furnace fan limit switch.
When settings are off:
- It causes overheating
- Furnace may shutdown
- Blowers starts too late than usual
- Technicians properly adjust the setting of the furnace fan limit switch to make sure accurate fan timing temperature control.
Why you should call professionals like MileHi HVAC
At MileHi HVAC we provide expert diagnosis, repairs and safety inspections and ensure proper functioning of your furnace all season long. When your furnace shows the symptoms of bad limit switch on furnace our technicians perform several tasks:
- Inspect the root causes
- Test the switch professionally
- Repairs and replace the damaged components
- Assures safe and efficient heating
Preventions from limit switch problems
By following these maintenance tips you can avoid failures in the future and enjoys the comfort peacefully.
- Yearly schedule the furnace tune up tips
- Notice the unusual furnace behavior
- Address the overheating issues as early as possible
- Replace your air filters every 1-3 months
- Regular maintenance saves you from costly repairs and keeps your system working properly.
Final Thoughts
Knowing the symptoms of a bad limit switch on a furnace can prevent major repair costs and keep your home safe. Your switch may fail if your furnace runs constantly, shuts down repeatedly, or delivers cold air. If you experience these issues, don’t attempt repairs on your own, as it can create serious safety risks. Instead, contact MileHi HVAC for professional and safe furnace repair in Denver. Our experienced team will restore your furnace’s efficiency and ensure a reliable, worry-free heating system.
FAQS
What are the most common symptoms of a bad limit switch?
Constantly running a blower, overheating, short cycles and lukewarm air are the common symptoms of a bad limit switch.
Can I safely reset the switch myself?
Yes you can reset the limit switch on furnace systems but at once because repeated resets are unsafe and indicate deeper issues.
How do professionals perform limit switch testing?
They use multimeters, continuity tests and internal furnace diagnostics for limit switch testing.
What causes a limit switch to fail?
The common causes behind a limit switch failing are dirty air filters, electrical failures, overheating are the most common culprits.
Should I adjust the fan limit switch myself?
No, Incorrect fan limit switch adjustment can harm your furnace. This can be done by only trained professionals.
