Water Heater is among one of the essential everyday appliances in our life. The purpose it serves is definitely for greater use; especially when it comes to the winter season.
I mean imagine you not getting hot water because there was never a water heater invented. That would have been catastrophic.
However, one thing that we tend to overlook is that like any other electric appliance at times water heater goes through certain issues and problems as well.
When this happens, immediately get your water heater repair. I mean we wouldn’t want to lose this great blessing right?
There is one thing though before you go contacting water heater repair contractors you must know what are some most common issues faced by our water heaters.
What are the most common water heater issues?
When we talk about the water heater issues, there are certain very common issues reported by the majority of its users.
Like any other appliance, these issues should not be left neglected.
Here are some of the major and most water heater issues:
- Water Heater Leaks
- Foul Smells and Discoloration
- No Hot Water
- Unusual Noises
- Too Hot Water
- Not Enough Hot Water
Let’s talk about these issues one by one and see how we can repair them:
Water Heater Leaks:
Water Heater Leaks is among one of the most common water heater problems reported to contractors.
Usually when this happens clients assume to either replace a water heater or go for a new water heater installation. However, there are ways you can try to repair it yourself.
Sometimes, the leak is mostly minor which might not cause problems right away but if ignored it can be a severe headache.
The water heater leak repair actually depends on the location of the leak.
For instance, if the leak is from the top it could be due to the parts located on your tank’s lid such as a cold inlet or hot outlet pipe could be loose, the valves may have failed, or could be leaking.
You can easily repair them by fixing the vales and tightening them.
If the leak is from the bottom it could be due to the drain valve or your pressure relief valve. For this, all you need to do is check the valves and adjust the pressure for water heater repair.
Foul Smells and Discoloration:
Another common problem is foul smells and discoloration.
If you are witnessing any of this, don’t go calling your heating contractors to get a new water heater install just yet.
There might be something you can do and save your money.
One of the reasons for the discoloration could be the sediments in your tanks. To get rid of them, try flushing out your tank to push these unsightly sediments out.
If you have a traditional tank water heater, the anode can be producing foul smells. The corrosive agents on your anode act as an imposter, for this you need to replace the anode.
Here is how you do it:
- Locate the Anode
- Turn of water and power supply
- Drain the water
- Use proper tools to take out the old anode
- Insert your new anode properly and seal it off.
No Hot Water:
Moving forward, people also report having no hot water as one of the most common issues of the water heater.
Here are some of the tips to fix this issue;
It is possible that your unit might have lost power or you might have blown a fuse. If so is the case, what you need to do is reset the breaker or install a new fuse to bring back the power in your unit.
Another reason could be your pilot light. If it has gone out you will need to relight it for the water heater to produce hot water again.
In case none of these tips works, contact your heating contractors for water heater repair.
If your water heater is making unusual and constant noises, you need to consider repairing it as soon as possible.
Don’t worry, we will guide you.
Accumulation of Sediments:
Again, the accumulation of sediments could be a contributing factor to this problem. Try your annual flush out to get rid of sediments. Another thing you can try is to clean or replace the affected elements.
Secondly, if you are hearing humming sounds it could be due to the loose elements because of the vibrations produced by the constantly moving water.
With the use of the right tools, you can easily tighten these elements.
A valve that is not completely open could be a reason for screeching or high-pitched noises in your water heater.
Check out all the valves and make sure they are open completely.
Too Hot Water:
Another common issue is the water heater producing too hot water for the people.
It doesn’t mean your water heater is broken or that you would need a new water heater installation.
It simply means it needs to be looked after.
For this, you need to make proper adjustments to your thermostat. Try setting it to a lower temperature and see if it works. If still excessively hot water pops out of it before turning your faucet on it means there are certain faulty parts in your heater.
If this happens, you need to contact heater contractors for water heater repair.
Not Enough Hot Water:
If you are having not enough hot water try these out:
- Test the Thermostat
- If that doesn’t work check out for Leak around your unit
- Lastly, try flushing your tank.
When to Replace a Water Heater:
If we talk about the water heater replacement, well usually their lifespan ranges between eight to ten years however if you are facing any such issues and none of our tricks are working, it might be the time to consider replacing it.
Get Started with our Repair Services:
We get it; you have tried all the tricks above.
However, if your water heater is still not functioning properly, get started with our repair services
We Mile Hi HVAC provides water heater repair service in Denver at reasonable prices. You can also get a new water heater installed with our water heater installation services.
Just give a call to our heating contractors and we will do it for you.
No doubt, water heater problems are very common but you can repair them with the tips mentioned above.
However, if you fail to do so contact Mile Hi HVAC for our seamless services